|
| |
|
AIRCRAFT &
HELICOPTER ENGINE PRODUCT LINE |
|
|
|
BH Hanson Power Wins I.R.C.H.A. Gasser Speed
Cup Event
Adam Mancini's 29 3D max powered Miniature
Aircraft Spectra G won the IRCHA Gasser
speed cup event. Top time in practice was
102 MPH. |
 |
 |
|
|
Heli Engines Available in
20/231/260/290 PUH & G230/240/260/270/290 RC Style |
|
 |
G200PU 3D Max - Comes as shown. modifications include modified
cylinder, lightened piston, trued and balanced crank, big bore
carburetor, metal carburetor block with Teflon gaskets, improved
ignition system. Zenoah air cleaner with choke. smooth and powerful
Zenoah. Approximately 20% more power then a stock G200.
|
|
|
|
 |
|
PUH Style |
|
|
|
|
|
|
-
260 3D-Max
- Pump bulb 643 carburetor, metal isolator block, hi
compression ported cylinder with new porting for 2011, lightened
ported piston, trued and balanced crankshaft and flywheel for
smooth running. - $495
|
|
|
- G200PU 3D
Max - Modified cylinder, lightened piston,
trued and balanced crank, big bore carburetor, metal
carburetor block with Teflon gaskets, improved ignition
system. Zenoah air cleaner with choke. smooth and powerful...All Zenoah. Approximately 20% more power then a
stock G200. . $495
|
 |
|
RC Style |
|
|
|
-
29 3D Max
-
Our most powerful Heli engine. 28.5 cc using Zenoah bore up
cylinder, trued and balanced crank, balanced flywheel,
ported 2mm bore up cylinder, very light piston, metal
isolator block. smooth and powerful. Available in
the following...RC - $515
/ PUH - $525
|
|
|
|
|
|
Zenoah 20 E.I. 90 degree intake
faces your carb rearward on this quality casting for
more cowl space. Uses an external pulse line on supplied
nipples. linkage is straight pull. Comes with all
gaskets and heat isolator.
$39 |
|
|
|
.jpg) |
|
Zenoah 20 E.I. take-offs. These are new
parts removed from Zenoah 20 EI engines.
They may have a tool mark on some of them from
removal, but are as new and unused. This
will save you
BIG $$
off retail if you need these parts. It
there's something else you need, call for
pricing. We do quality repairs also and give
fast service. Supply will be limited on
these parts. |
|
|
|
.jpg) |
|
20 E.I. Prop hub including
Hub with sensor, Prop washer, Nut, mounting
stud.
$20 |
|
20 E.I. Muffler
$10 |
|
20 E.I. WT 811 carb
$30 |
|
20 or 26 E.I. ignition box
$40 |
|
|
|
|
|
Aircraft Engines by R.C. Ignition |
 |
 |
|
Click images to
enlarge |
|
Our Zenoah Aircraft engines are
modified to give you a trouble free, light weight engine with easy
starting abilities. All engines feature an efficient electronic
ignition that will run for about two hours on a 4.8 or 6 volt 600
M.A. battery pack. Engine performance is enhanced with the removal
of excess crankshaft weight and modified spark curve. Also included
on all engines is a safety hub that is stronger then the factory
supplied propeller hub and a rotated carburetor on a custom intake
manifold for a straight pull linkage. Hand starting is easy with a
hot spark at 1 RPM ! All engines are custom made, pre run and
adjusted for trouble free use. While we keep these engines in stock
there may a two week wait for delivery depending on demand. |
|
|
-
Above left -
G26.
Our 260 SPU weighs about 2.5 lbs and makes 17 lbs of thrust with a
Mejzlik 18-6 prop. RPM is 9000 with no muffler and 8200 with muffler.
Engine is supplied as pictured along with firewall mount, factory muffler,
manual and plug wrench. - $425
|
-
Above center - G38.
Our G38 SPU weighs in at 3.5 lbs. Best performance is with a 20-8 or 18-10 prop.
Spark retard is linkage controlled for easy starting. Engine is supplied with no
muffler, custom firewall mount, factory manual and plug wrench. -
$475
|
-
Above right - G62.
Our G62 SPU is trimmed and lightened to just over 4 lbs. This powerhouse turns a
22-10 prop 7000 RPM and makes 28 lbs of thrust. Engine is supplied as pictured
with custom firewall mount, factory muffler, manual and plug wrench. -
$525
|
|
|
Zenoah Aircraft Engines
|
 |
| G26-PU |
|
| G26-EI |
| G38-PU |
| G45-PU |
| G62-PU |
| GT-80 |
|
|
|
|
Safety Hub
|
|
Our CNC machined replacement prop hub fits all
G23, 231 and 260 PU engines. It is designed to eliminate the problem of the weak
one piece necked down stud that comes as standard equipment on the PU engines.
This design allows you to tighten the prop bolt securely without the worry of
snapping the stud. Comes as shown with all high grade hardware. -
$39.50 |
|
|
|
 |
|
|
Click image to
enlarge |
|
|
Super Trap, The ultimate air trap (UAT)
tank |
|
|
|
This 4 oz tank can be used with turbine or
gasoline engines to remove air and impurities from the fuel before entering the
engine. This is a MUST for turbine engines and is competitively priced at
$46 |
|
|
|
|
|
|
|
|
.jpg)
